|
|
|
|||||||
| Mile High Chapter This is the place to be for Colorado and Wyoming members. |
 |
|
|
Thread Tools | Display Modes |
|
#2
07-28-2010, 04:17 AM
|
||||
|
||||
|
ebay man... they are cheap and its just an aluminum can
__________________
 First K-swap S2000 My seller feedback www.k-tuned.com / www.skunk2.com / www.clutchmasters.com / www.magnusmotorsports.com / www.passwordjdm.com 
|
|
#3
07-29-2010, 01:56 PM
|
||||
|
||||
|
If this is for a boosted car you want an open catch that has a breather on it so excess crank case pressure can vent. It will also need to have internal baffles so it can recondense oil vapors for collection in the can. If you don't have the internal baffles then you might as well just stick a mini filter element on the front nipple of the valve cover on the driver's side. It accomplishes the same thing, just not as nice looking as a catch can. As for $60 that is a pretty hard price point to find a breather catch can. You might want to look at Moroso's line of cans here
http://www.moroso.com/catalog/catego...?catcode=13400 Look at can part number 85470 it has an 3/8 NPT inlet so you can pretty much find an adapter to screw into it that will fit up with where you are taking the lines from. Hope this helps
__________________
Clif  Fortes Fortuna Adiuvat
|
|
#4
07-29-2010, 03:24 PM
|
|||
|
|||
|
We have catch cans as low as $10 up!
Many different styles to choose from. PM me if you have any questions
|
|
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
