Where to mount map sensor for boost guage?

[archtop]

Dave, Where did you mount the map sensor for your boost gauge? Thanks John

[repiv]

The actual MAP sensor is just tucked under the dash left of the steering column amongst all the other wiring there. I think I duct taped it to some other wiring bundle to keep it from bouncing around. I brought the vacuum/pressure line through the firewall via that big wiring grommet near the clutch pedal.

[archtop]

Very clever Dave.I was trying to find a place in the engine compartment.So much simpler under the dash,thanks!

[repiv]

Well, I looked at it like which is easier to push through the firewall - one stiff vacuum hose or a whole wiring bundle.

[archtop]

Did you shorten your wire harness or just bundle it (wire tie) together?

[repiv]

I just tied all the excess wiring together. Didn't want to take a chance on changing the resistence the signal had to travel through.